External BEC (UBEC) 5A 5V Receiver power

Specifications:

Voltage: 9V-35V (3-8SLIPO)

Continuous Current: 5A

Instantaneous current: 6A 20

Output voltage: 5.25V + /-0.5V

Dimensions: 43 * 21 * 1mm

Product Weight: 18g

Product Features

A switching power supply design , switching power supply controller chips frequency of 300KHz, both over-current and over-temperature protection, chip efficiency up to 92% ;

Small volume , light weight ;

Shield electronic devices are protected with a magnetic output lines , greatly reducing electromagnetic interference , to ensure acceptance of machine work

has the power to prevent reverse polarity protection, reverse power if the accident does not cause damage to the traditional advantages of UBEC BEC compare :

Switching power mode BEC and BEC compared to using a linear regulator of the advantages is mainly reflected in : When using 3 series (11.1V) or more batteries , you can greatly reduce the BEC fever, and improve overall efficiency.

For example : When using a 4 string lithium , the normal operating voltage of about 14.8V.

The transmission mode with a linear regulator to output current, the power must also end 5V/1A input current to 1A . So there 14.8V × 1A = 14.8W of power consumption in the BEC, BEC , however the actual useful output only 5V × 1A = 5W, so the overall efficiency of only 5/14.8 = 33.8% , while power consumption is 9.8W into heat, it will lead to overheating BEC chip into the protected status and unable to work ;

Use a switch-mode current to output 5V/1A , our actual tests show power terminal can simply enter 0.38A current , ie 14.8V × 0.38A = 5.6W of power .

Packet content:

1 x 5A external BEC